Check it by the
procedure below to see if the function of the ECM is normal.
| 1. |
Turn the ignition key to the "ON"
position. |
| 2. |
Cover the forward facing
sensor. |
| 3. |
Head a light to the rearward looking
sensor. |
| 4. |
The ECM should be darkened as soon as the
rearward looking sensor detects the light.
|
If this test is performed in daytime,
the ECM may be darkened as soon as the forward facing sensor
is
covered. | |
| 5. |
When the reverse gear is engaged, the ECM
should not be darkened.
When heading lights to both the forward facing
and rearward looking sensors, the ECM should not be
darkened. |
| 1. |
Remove the mirror wiring cover
(A).
|
| 2. |
Remove the mirror mounting screw (A) and
connector (B).
|
| 3. |
Remove the mirror (A) pulling up in the arrow
direction.
|
Make sure not to damage the mounting
bracket when removing the
mirror. |
|
| 1. |
Install the mirror making sure the mounting
bracket not to be damaged. |
| 2. |
Install the mirror wiring cover after
reconnecting the connector and tightening the
screw. |
